Product ID:CORDOPREG E-293
MSDS Date:12/06/1985
FSC:8040
NIIN:00N055942
MSDS Number: BWDLK

FERRO CORP

34 SMITH ST
NORWALK, CT 06852
US

Emergency Phone: 203-853-2123

Info Phone: 203-853-2123

Preparer: M. LAING

Cage: FERRC

FERRO CORP

263 NORWALK, CT 06852 US

Telephone: 203-853-2123

Cage: FERRC

NOVALAK EPOXY RESIN

Fraction By Weight: 27%

OSHA PEL N/K

ACGIH TLV: N/K

LIQUID DICARBOXYLIC ANHYDRIDE

Fraction By Weight: 12%

OSHA PEL N/K

ACGIH TLV: N/K

ORGANOPHOSPHITE/GLYCOL ETHER

Fraction By Weight: 1%

OSHA PEL N/K

ACGIH TLV: N/K

SUBSTRATE; (SUBSTRATE-FIBERGLASS OR OTHER)

Fraction By Weight: 60%

OSHA PEL N/K

ACGIH TLV: N/K

POLYETHYLENE; (POLYETHYLENE FILM - THIS PRODUCT IS SUPPLIED

OSHA PEL N/K

ACGIH TLV: N/K

INGS ARE INTEGRALLY LINKED BY PARTIAL POLYMERIZATION

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

ALLERGIC RXNS FOR THOSE WHO ARE EASILY SENSITIZED.

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:POSSIBLE SENSITIZATION. CAN CAUSE
IRRITATION IF NOT TREATED. EYE:IRRITANT. CAN CAUSE IRRITATION IF
NOT TREATED. INHAL:POSSIBLE DURING MOLDING OPERATION. CAN CAUSE
IRRITATION IF NOT TREATED. INGES T:UNLIKELY UNKNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN:WASH W/SOAP & WATER. AVOID FUTURE CONTACT. EYE:FLUSH
W/WATER FOR AT LEAST 15 MINUTES. SEE MD. INHAL:REMOVE TO FRESH AIR
AREA - SEE MD. INGEST:SEE MD.

Extinguishing Media:FOAM, CO*2 OR DRY CHEMICAL PER NFPA CLASS "B"
EXTINGUISHER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID EYES, SKIN & LUNG CONTACT
W/FUMES FROM THE MOLDING AREA. AVOID EYE & SKIN CONTACT W/RESIN.
Other Precautions:AVOID EYE CONTACT W/CONTAMINATED OBJECTS - E.G.
HANDS, RAGS, ETC. STORE <32F TO MAINTAIN SHELF LIFE.

Respiratory Protection:NIOSH/MSHA APPROVED CHEMICAL CARTRIDGE ORGANIC
VAPORS RESPIRATOR IF REQUIRED.
Ventilation:PROVIDE LAY-UP AREAS W/ADEQUATE VENTILATION - PROVIDE
OVENS, PRESSES & AUTOCLAVE AREAS W/GOOD EXHAUST VENTILATION.
Protective Gloves:DISPOSABLE POLYETHYLENE GLOVES.
Eye Protection:SUITABLE SAFETY GLASSES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Spec Gravity:1.8 (H*2O=1)
Appearance and Odor:FAINT, CHARACTERISTIC ODOR - SLIGHTLY IRRITATING.

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT WILL FURTHER POLYMERIZE TO REDUCE
SHELF LIFE.
Hazardous Decomposition Products:CARBON MONOXIDE & DIOXIDE, LOW MW
HYDROCARBONS, DEGRADATION PRODUCTS OF BROMINE & PHOSPHOROUS.

Waste Disposal Methods:REFER TO LATEST LOCAL, STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.